Cutback SC 3000
SC-3000 is a slow curing cutback made by blending bitumen with a low-volatility oil. The number gives its minimum kinematic viscosity at 60°C (3000–6000 mm²/s), so SC-3000 is a heavier grade that holds more binder on the surface.
Where Cutback SC 3000 is used
Cutback bitumen is bitumen blended with a petroleum solvent so it can be applied at low temperatures. Once laid, the solvent evaporates and leaves the binder behind. The solvent type sets the curing speed.
- 01Dust control, road-mix work and slow-setting maintenance mixes
- 02Surface dressing and chip seals
- 03Cold-mix asphalt for maintenance and remote sites
- 04Projects without hot-mix plants or heating equipment
Conforms to ASTM D2026
Supplied to ASTM D2026. Tested for viscosity, flash point, water content, distillation profile and properties of the residue.
Typical specifications — Cutback SC 3000
| Property | Unit | Min | Max | Test method |
|---|---|---|---|---|
| Kinematic viscosity at 60°C | mm²/s | 3000 | 6000 | ASTM D2170 |
| Flash point (Tag open cup) | °C | 121 | – | ASTM D3143 |
| Water | % vol | – | 0.2 | ASTM D95 |
| Residue from distillation to 360°C | % vol | 80 | – | ASTM D402 |
| Tests on residue from distillation | ||||
| Kinematic viscosity at 60°C | Pa·s | 0.4 | 7.0 | ASTM D2171 |
| Ductility at 25°C | cm | 100 | – | ASTM D113 |
| Solubility in trichloroethylene | % | 99.0 | – | ASTM D2042 |
Typical values based on ASTM D2026. The binding specification for each cargo is the certificate of analysis issued at loading. Custom specifications are available on request.
Storing Cutback SC 3000
Temperature: Store and apply at the lowest temperature that gives a workable viscosity. Heating drives off solvent and raises fire risk.
Containers: Keep in closed, sealed tanks or drums to stop solvent evaporating, which changes the grade.
Fire safety: Cutbacks contain flammable solvent. Keep them away from open flames and sparks, earth the equipment, and keep fire extinguishers at hand.
Ventilation: Store in well-ventilated areas and avoid breathing vapours. Follow local rules on VOC emissions.
How we ship Cutback SC 3000
Get a price for Cutback SC 3000
Tell us the quantity and destination port. We'll send you a written offer today.
- No cost to ask
- FOB · CIF · CFR · DAP
- LC, SBLC or TT against documents
Cutback SC 3000: common questions
What is Cutback SC 3000?+
SC-3000 is a slow curing cutback made by blending bitumen with a low-volatility oil. The number gives its minimum kinematic viscosity at 60°C (3000–6000 mm²/s), so SC-3000 is a heavier grade that holds more binder on the surface.
What is Cutback SC 3000 used for?+
Cutback SC 3000 is mainly used for: dust control, road-mix work and slow-setting maintenance mixes; surface dressing and chip seals; cold-mix asphalt for maintenance and remote sites; projects without hot-mix plants or heating equipment.
Which standard does WGV's Cutback SC 3000 meet?+
Supplied to ASTM D2026. Tested for viscosity, flash point, water content, distillation profile and properties of the residue.
How is Cutback SC 3000 shipped?+
WGV Oil Trading ships Cutback SC 3000 by steel drums, bitutainer or bulk, on FOB, CIF, CFR or DAP terms. Every cargo is inspected at the load port by SGS, Intertek or an equivalent independent inspector.
How do I get a price for Cutback SC 3000?+
Send the quantity, destination port, preferred Incoterms and timing through the quote form on this page, by WhatsApp on +34 663 192 105, or by email to sales@wgvoiltrading.com. WGV Oil Trading replies with a written offer the same day. Payment is by documentary LC, SBLC or TT against documents.