Base Oils
Base oils are the main ingredient in finished lubricants. Group I solvent-refined grades (SN150, SN500, Bright Stock) and Group II hydro-processed grades are supplied to lubricant blenders in flexitanks, drums or bulk.
Base Oils grades we supply
Where Base Oils is used
Base Oils is supplied as: SN150 (Group I), SN500 (Group I), Bright Stock 150, Group II 150N / 500N. Grades and specifications can be matched to your destination market on request.
- 01Engine oil and industrial lubricant blending
- 02Hydraulic, gear and turbine oils
- 03Greases and metalworking fluids
- 04Process oils and rubber extender oils
Conforms to API Group I / II
Supplied to API base stock categories, tested for viscosity, viscosity index, flash point, pour point, colour and saturates/sulphur (Group II).
Typical specifications — Base Oils
| Property | Unit | Min | Max | Test method |
|---|---|---|---|---|
| SN150 | ||||
| Kinematic viscosity at 40°C | mm²/s | 28 | 34 | ASTM D445 |
| Viscosity index | – | 95 | – | ASTM D2270 |
| Flash point (COC) | °C | 200 | – | ASTM D92 |
| Pour point | °C | – | −6 | ASTM D97 |
| SN500 | ||||
| Kinematic viscosity at 40°C | mm²/s | 90 | 110 | ASTM D445 |
| Viscosity index | – | 95 | – | ASTM D2270 |
| Flash point (COC) | °C | 230 | – | ASTM D92 |
| Pour point | °C | – | −6 | ASTM D97 |
| Bright Stock 150 | ||||
| Kinematic viscosity at 100°C | mm²/s | 28 | 33 | ASTM D445 |
| Viscosity index | – | 95 | – | ASTM D2270 |
| Flash point (COC) | °C | 280 | – | ASTM D92 |
Typical values based on API Group I / II. The binding specification for each cargo is the certificate of analysis issued at loading. Custom specifications are available on request.
Storing Base Oils
Storage: Keep drums and IBCs under cover, away from direct sun and rain, ideally between 0°C and 40°C.
Containers: Store drums horizontally or covered so water cannot collect on lids, and keep bungs tight.
Contamination: Use dedicated, clean transfer equipment for each grade to protect lubricant quality.
Shelf life: Base oils are stable when sealed. Rotate stock and re-test after long storage.
How we ship Base Oils
Get a price for Base Oils
Tell us the quantity and destination port. We'll send you a written offer today.
- No cost to ask
- FOB · CIF · CFR · DAP
- LC, SBLC or TT against documents
Base Oils: common questions
What is Base Oils?+
Base oils are the main ingredient in finished lubricants. Group I solvent-refined grades (SN150, SN500, Bright Stock) and Group II hydro-processed grades are supplied to lubricant blenders in flexitanks, drums or bulk.
What is Base Oils used for?+
Base Oils is mainly used for: engine oil and industrial lubricant blending; hydraulic, gear and turbine oils; greases and metalworking fluids; process oils and rubber extender oils.
Which standard does WGV's Base Oils meet?+
Supplied to API base stock categories, tested for viscosity, viscosity index, flash point, pour point, colour and saturates/sulphur (Group II).
How is Base Oils shipped?+
WGV Oil Trading ships Base Oils by flexitanks, steel drums, iso tanks or tanker vessel, on FOB, CIF, CFR or DAP terms. Every cargo is inspected at the load port by SGS, Intertek or an equivalent independent inspector.
How do I get a price for Base Oils?+
Send the quantity, destination port, preferred Incoterms and timing through the quote form on this page, by WhatsApp on +34 663 192 105, or by email to sales@wgvoiltrading.com. WGV Oil Trading replies with a written offer the same day. Payment is by documentary LC, SBLC or TT against documents.