Petroleum products we supply
Every product WGV Oil Trading supplies, with typical specifications to the relevant international standard. Choose a product for its specification sheet, uses, storage and packaging.
Diesel EN590
Diesel EN590 is the European standard for automotive diesel: ultra-low sulphur (10 mg/kg max), cetane number 51 min and up to 7% biodiesel (FAME).
EN590 10 ppm summer grade · EN590 10 ppm winter grade · EN590 Arctic grades on requestView specifications →
Gas Oil
Gas oil is a middle distillate used where automotive EN590 is not required: industrial burners, power generation, marine engines and heating.
Gas oil 0.1% sulphur · Gas oil 0.5% sulphur · Gas oil 1.0% sulphurView specifications →
Jet A-1
Jet A-1 is the kerosene-type aviation turbine fuel used by commercial aircraft worldwide, with a freezing point of −47°C max.
Jet A-1 (AFQRJOS checklist) · Jet A (ASTM D1655) · TS-1 on requestView specifications →
Gasoline
Motor gasoline is supplied in RON 92, 95 and 97/98 grades, either to the European EN 228 standard or to the national specification of the importing country.
RON 92 · RON 95 (EN 228) · RON 97 / 98View specifications →
Naphtha
Naphtha is a light distillate used mainly as petrochemical cracker feedstock and as a gasoline blending component.
Open-spec naphtha (full range) · Light naphtha · Heavy naphthaView specifications →
Fuel Oil
Residual fuel oil is supplied for marine bunkering and for power and industrial use.
HSFO 380 cSt (3.5% S) · VLSFO 0.5% S · IFO 180 cStView specifications →
LPG
Liquefied petroleum gas (LPG) is supplied as commercial propane, commercial butane or a propane/butane mix to the ratio the destination market uses.
Commercial propane · Commercial butane · Propane/butane mix (e.g. 30/70, 50/50)View specifications →
Base Oils
Base oils are the main ingredient in finished lubricants.
SN150 (Group I) · SN500 (Group I) · Bright Stock 150View specifications →
Crude Oil
Crude oil is supplied to refiners by named grade, subject to availability and full compliance checks on origin.
Light sweet crude · Medium sour crude · Heavy crudeView specifications →
Aromatics
Aromatic solvents and feedstocks: para-xylene for PTA/polyester production, mixed xylene for solvents and isomerisation, and nitration-grade toluene for chemicals, solvents and blending.
Para-xylene (PX) · Mixed xylene (MX) · Toluene (nitration grade)View specifications →
Blending Components
Gasoline blending components used by blenders and refiners to adjust octane, oxygen content and volume: MTBE (oxygenate), reformate (high-octane aromatic stream) and pyrolysis gasoline from steam crackers.
MTBE · Reformate · Pyrolysis gasoline (pygas)View specifications →
Methanol
Methanol is a basic chemical building block used to make formaldehyde, acetic acid, MTBE and olefins, and as a solvent and fuel component.
Methanol IMPCA · Methanol Grade AA (ASTM D1152 type)View specifications →
Ethanol
Ethanol is a renewable alcohol used mainly as a gasoline blending component, where it raises octane and adds oxygen, and as an industrial solvent.
Fuel ethanol (EN 15376) · Denatured fuel ethanol (ASTM D4806) · Industrial / technical ethanolView specifications →
Polymers
Polyethylene and polypropylene resins in pellet form for converters and manufacturers: HDPE, LDPE and LLDPE for film, bottles, pipe and moulding, and polypropylene for fibres, packaging and injection-moulded parts.
HDPE (film, blow moulding, injection, pipe) · LDPE (film, extrusion coating) · LLDPE (film)View specifications →
Industrial Solvents
Hydrocarbon and alcohol solvents for manufacturing and processing: hexane for oilseed extraction and adhesives, white spirit for paints and cleaning, and isopropyl alcohol for coatings, inks, electronics and disinfection.
Hexane (extraction / technical grade) · White spirit / mineral spirits · Isopropyl alcohol (IPA)View specifications →
Bitumen
120 bitumen grades across 10 families, from penetration and viscosity grades to PMB and emulsions.
60/70 · VG 30 · PG 76-22 · PMBView specifications →
Need a product?
Tell us the grade, quantity and destination port and we'll send you a written offer today.
- No cost to ask
- FOB · CIF · CFR · DAP
- Independent inspection at load port