120 grades · 10 families

Bitumen supply: every grade, every standard

WGV Oil Trading supplies 120 bitumen grades across 10 families to EN, ASTM, AASHTO, IS, AS and GB/T standards, in bulk, steel drums, jumbo bags and bitutainers, with independent inspection at the load port.

Penetration Grade Bitumen
EN 12591 · ASTM D946

Penetration Grade Bitumen

Penetration grade bitumen is classified by how far a standard needle sinks into the binder at 25°C, measured in tenths of a millimetre.

17 gradesView specifications →
Viscosity Grade Bitumen
IS 73 · AASHTO M226

Viscosity Grade Bitumen

Viscosity grade bitumen is classified by its viscosity at 60°C — the maximum pavement temperature — which predicts rutting performance more reliably than penetration alone.

15 gradesView specifications →
Australian Standard Bitumen
AS 2008

Australian Standard Bitumen

AS 2008 classifies residual bitumen for pavements by viscosity at 60°C into Class grades, used by Australian, New Zealand and Pacific road authorities.

5 gradesView specifications →
Cutback Bitumen
ASTM D2028 · D2027 · D2026

Cutback Bitumen

Cutback bitumen is bitumen blended with a petroleum solvent so it can be applied at low temperatures.

15 gradesView specifications →
Bitumen Emulsion
ASTM D2397 · D977 · EN 13808

Bitumen Emulsion

Bitumen emulsion is fine droplets of bitumen dispersed in water with an emulsifier.

20 gradesView specifications →
Oxidized Bitumen
Softening point / penetration

Oxidized Bitumen

Oxidized (air-blown) bitumen is made by blowing air through hot bitumen, which raises its softening point and makes it far less sensitive to temperature.

13 gradesView specifications →
Performance Grade Bitumen
AASHTO M320 (Superpave)

Performance Grade Bitumen

Performance grade (PG) binders are specified by the pavement temperatures they must withstand.

16 gradesView specifications →
Polymer Modified Bitumen
EN 14023 · SBS / EVA

Polymer Modified Bitumen

Polymer modified bitumen (PMB) adds elastomers such as SBS, or plastomers such as EVA, to the binder.

6 gradesView specifications →
Chinese Grade Bitumen
GB/T 15180 · JTG F40

Chinese Grade Bitumen

AH heavy-traffic paving bitumen is graded by penetration under the Chinese national standard and is widely specified on Chinese-built and Belt-and-Road infrastructure projects.

5 gradesView specifications →
Bituminous Coatings & Related Products
Construction & waterproofing

Bituminous Coatings & Related Products

Bitumen-based coatings, waterproofing and road materials, supplied alongside binders so a project can source everything in one order.

8 gradesView specifications →
Request a Quote

Need bitumen?

Tell us the grade, quantity and destination port and we'll send you a written offer today.

  • No cost to ask
  • FOB · CIF · CFR · DAP
  • Independent inspection at load port