Polymers
Polyethylene and polypropylene resins in pellet form for converters and manufacturers: HDPE, LDPE and LLDPE for film, bottles, pipe and moulding, and polypropylene for fibres, packaging and injection-moulded parts. Each grade is defined by its melt flow index and density.
Polymers grades we supply
Where Polymers is used
Polymers is supplied as: HDPE (film, blow moulding, injection, pipe), LDPE (film, extrusion coating), LLDPE (film), Polypropylene homopolymer & copolymer. Grades and specifications can be matched to your destination market on request.
- 01Packaging film, bags and shrink wrap
- 02Bottles, containers and blow-moulded parts
- 03Pipes, cables and extrusion
- 04Injection-moulded goods, fibres and woven sacks
Conforms to ISO 1133 · ISO 1183 (producer data sheet)
Supplied as prime virgin resin with the producer's data sheet and certificate of analysis for each lot. Melt flow index and density are confirmed to ISO 1133 and ISO 1183.
Typical specifications — Polymers
| Property | Unit | Min | Max | Test method |
|---|---|---|---|---|
| HDPE | ||||
| Density | g/cm³ | 0.941 | 0.965 | ISO 1183 |
| Melt flow index (190°C / 2.16 kg) | g/10 min | 0.05 | 30 | ISO 1133 |
| LDPE | ||||
| Density | g/cm³ | 0.910 | 0.925 | ISO 1183 |
| Melt flow index (190°C / 2.16 kg) | g/10 min | 0.2 | 50 | ISO 1133 |
| LLDPE | ||||
| Density | g/cm³ | 0.915 | 0.925 | ISO 1183 |
| Melt flow index (190°C / 2.16 kg) | g/10 min | 0.5 | 5 | ISO 1133 |
| Polypropylene | ||||
| Density | g/cm³ | 0.900 | 0.910 | ISO 1183 |
| Melt flow index (230°C / 2.16 kg) | g/10 min | 2 | 40 | ISO 1133 |
Typical values based on ISO 1133 · ISO 1183 (producer data sheet). The binding specification for each cargo is the certificate of analysis issued at loading. Custom specifications are available on request.
Storing Polymers
Storage: Store bags indoors on pallets, out of direct sunlight and away from heat sources. UV and heat can degrade resin over time.
Handling: Stack pallets within the producer's height limits and keep stretch-wrap intact until use to avoid moisture and contamination.
Safety: Pellets on the floor are a slip hazard. Sweep spills promptly and keep dust away from ignition sources.
Shelf life: Polymers are stable when stored correctly. Use on a first-in, first-out basis and keep lot numbers traceable.
How we ship Polymers
Get a price for Polymers
Tell us the quantity and destination port. We'll send you a written offer today.
- No cost to ask
- FOB · CIF · CFR · DAP
- LC, SBLC or TT against documents
Polymers: common questions
What is Polymers?+
Polyethylene and polypropylene resins in pellet form for converters and manufacturers: HDPE, LDPE and LLDPE for film, bottles, pipe and moulding, and polypropylene for fibres, packaging and injection-moulded parts. Each grade is defined by its melt flow index and density.
What is Polymers used for?+
Polymers is mainly used for: packaging film, bags and shrink wrap; bottles, containers and blow-moulded parts; pipes, cables and extrusion; injection-moulded goods, fibres and woven sacks.
Which standard does WGV's Polymers meet?+
Supplied as prime virgin resin with the producer's data sheet and certificate of analysis for each lot. Melt flow index and density are confirmed to ISO 1133 and ISO 1183.
How is Polymers shipped?+
WGV Oil Trading ships Polymers by 25 kg bags on pallets or jumbo bags, on FOB, CIF, CFR or DAP terms. Every cargo is inspected at the load port by SGS, Intertek or an equivalent independent inspector.
How do I get a price for Polymers?+
Send the quantity, destination port, preferred Incoterms and timing through the quote form on this page, by WhatsApp on +34 663 192 105, or by email to sales@wgvoiltrading.com. WGV Oil Trading replies with a written offer the same day. Payment is by documentary LC, SBLC or TT against documents.