Cutback RC 30
RC-30 is a rapid curing cutback made by blending bitumen with a light, fast-evaporating naphtha/gasoline-type solvent. The number gives its minimum kinematic viscosity at 60°C (30–60 mm²/s), so RC-30 is thin enough to penetrate and prime porous surfaces.
Where Cutback RC 30 is used
Cutback bitumen is bitumen blended with a petroleum solvent so it can be applied at low temperatures. Once laid, the solvent evaporates and leaves the binder behind. The solvent type sets the curing speed.
- 01Tack coats, quick-setting surface treatments and patching where traffic must return fast
- 02Priming of unbound granular bases before asphalt
- 03Cold-mix asphalt for maintenance and remote sites
- 04Projects without hot-mix plants or heating equipment
Conforms to ASTM D2028
Supplied to ASTM D2028. Tested for viscosity, flash point, water content, distillation profile and properties of the residue.
Typical specifications — Cutback RC 30
| Property | Unit | Min | Max | Test method |
|---|---|---|---|---|
| Kinematic viscosity at 60°C | mm²/s | 30 | 60 | ASTM D2170 |
| Flash point (Tag open cup) | °C | 27 | – | ASTM D3143 |
| Water | % vol | – | 0.2 | ASTM D95 |
| Residue from distillation to 360°C | % vol | 50 | – | ASTM D402 |
| Tests on residue from distillation | ||||
| Penetration at 25°C | 0.1 mm | 80 | 120 | ASTM D5 |
| Ductility at 25°C | cm | 100 | – | ASTM D113 |
| Solubility in trichloroethylene | % | 99.0 | – | ASTM D2042 |
Typical values based on ASTM D2028. The binding specification for each cargo is the certificate of analysis issued at loading. Custom specifications are available on request.
Storing Cutback RC 30
Temperature: Store and apply at the lowest temperature that gives a workable viscosity. Heating drives off solvent and raises fire risk.
Containers: Keep in closed, sealed tanks or drums to stop solvent evaporating, which changes the grade.
Fire safety: Cutbacks contain flammable solvent. Keep them away from open flames and sparks, earth the equipment, and keep fire extinguishers at hand.
Ventilation: Store in well-ventilated areas and avoid breathing vapours. Follow local rules on VOC emissions.
How we ship Cutback RC 30
Get a price for Cutback RC 30
Tell us the quantity and destination port. We'll send you a written offer today.
- No cost to ask
- FOB · CIF · CFR · DAP
- LC, SBLC or TT against documents
Cutback RC 30: common questions
What is Cutback RC 30?+
RC-30 is a rapid curing cutback made by blending bitumen with a light, fast-evaporating naphtha/gasoline-type solvent. The number gives its minimum kinematic viscosity at 60°C (30–60 mm²/s), so RC-30 is thin enough to penetrate and prime porous surfaces.
What is Cutback RC 30 used for?+
Cutback RC 30 is mainly used for: tack coats, quick-setting surface treatments and patching where traffic must return fast; priming of unbound granular bases before asphalt; cold-mix asphalt for maintenance and remote sites; projects without hot-mix plants or heating equipment.
Which standard does WGV's Cutback RC 30 meet?+
Supplied to ASTM D2028. Tested for viscosity, flash point, water content, distillation profile and properties of the residue.
How is Cutback RC 30 shipped?+
WGV Oil Trading ships Cutback RC 30 by steel drums, bitutainer or bulk, on FOB, CIF, CFR or DAP terms. Every cargo is inspected at the load port by SGS, Intertek or an equivalent independent inspector.
How do I get a price for Cutback RC 30?+
Send the quantity, destination port, preferred Incoterms and timing through the quote form on this page, by WhatsApp on +34 663 192 105, or by email to sales@wgvoiltrading.com. WGV Oil Trading replies with a written offer the same day. Payment is by documentary LC, SBLC or TT against documents.