Bitumen 90/40
Oxidized bitumen 90/40 has a softening point of about 90°C and a penetration of about 40 dmm. It balances heat resistance with enough flexibility for waterproofing and sealing work.
Where Bitumen 90/40 is used
Oxidized (air-blown) bitumen is made by blowing air through hot bitumen, which raises its softening point and makes it far less sensitive to temperature. Grades are named softening point / penetration, so 90/15 means a softening point around 90°C and a penetration around 15 dmm.
- 01Roofing felts, membranes and built-up roofing
- 02Waterproofing and damp-proofing of foundations and structures
- 03Pipe coating and corrosion protection
- 04Joint sealing, flooring and adhesives
Conforms to ASTM D36 · ASTM D5
Supplied to softening point / penetration grade, tested to ASTM methods for softening point, penetration, loss on heating, solubility and flash point.
Typical specifications — Bitumen 90/40
| Property | Unit | Min | Max | Test method |
|---|---|---|---|---|
| Softening point (Ring & Ball) | °C | 85 | 95 | ASTM D36 |
| Penetration at 25°C | 0.1 mm | 35 | 45 | ASTM D5 |
| Loss on heating (5 h at 163°C) | % wt | – | 0.5 | ASTM D6 |
| Solubility in CS₂ | % wt | 99.0 | – | ASTM D4 |
| Flash point (COC) | °C | 250 | – | ASTM D92 |
| Specific gravity at 25°C | – | 1.01 | 1.05 | ASTM D70 |
Typical values based on ASTM D36 · ASTM D5. The binding specification for each cargo is the certificate of analysis issued at loading. Custom specifications are available on request.
Storing Bitumen 90/40
Temperature: Store drums, cartons and bags in a cool, shaded area. Direct sun can soften and deform packages.
Stacking: Stack on pallets on level ground, and keep jumbo bags off wet surfaces.
Melting: Melt gradually in a kettle or melter with temperature control. Avoid local overheating and never add water.
Shelf life: Oxidized grades are very stable in solid form. Keep packaging closed and protected from contamination.
How we ship Bitumen 90/40
Get a price for Bitumen 90/40
Tell us the quantity and destination port. We'll send you a written offer today.
- No cost to ask
- FOB · CIF · CFR · DAP
- LC, SBLC or TT against documents
Bitumen 90/40: common questions
What is Bitumen 90/40?+
Oxidized bitumen 90/40 has a softening point of about 90°C and a penetration of about 40 dmm. It balances heat resistance with enough flexibility for waterproofing and sealing work.
What is Bitumen 90/40 used for?+
Bitumen 90/40 is mainly used for: roofing felts, membranes and built-up roofing; waterproofing and damp-proofing of foundations and structures; pipe coating and corrosion protection; joint sealing, flooring and adhesives.
Which standard does WGV's Bitumen 90/40 meet?+
Supplied to softening point / penetration grade, tested to ASTM methods for softening point, penetration, loss on heating, solubility and flash point.
How is Bitumen 90/40 shipped?+
WGV Oil Trading ships Bitumen 90/40 by jumbo bags, cartons or steel drums, on FOB, CIF, CFR or DAP terms. Every cargo is inspected at the load port by SGS, Intertek or an equivalent independent inspector.
How do I get a price for Bitumen 90/40?+
Send the quantity, destination port, preferred Incoterms and timing through the quote form on this page, by WhatsApp on +34 663 192 105, or by email to sales@wgvoiltrading.com. WGV Oil Trading replies with a written offer the same day. Payment is by documentary LC, SBLC or TT against documents.