Bitumen 115/15
Oxidized bitumen 115/15 has a softening point of about 115°C and a penetration of about 15 dmm. Its very high softening point makes it suitable for coatings and compounds exposed to high service temperatures.
Where Bitumen 115/15 is used
Oxidized (air-blown) bitumen is made by blowing air through hot bitumen, which raises its softening point and makes it far less sensitive to temperature. Grades are named softening point / penetration, so 90/15 means a softening point around 90°C and a penetration around 15 dmm.
- 01Roofing felts, membranes and built-up roofing
- 02Waterproofing and damp-proofing of foundations and structures
- 03Pipe coating and corrosion protection
- 04Industrial compounds, battery and cable sealing, paints
Conforms to ASTM D36 · ASTM D5
Supplied to softening point / penetration grade, tested to ASTM methods for softening point, penetration, loss on heating, solubility and flash point.
Typical specifications — Bitumen 115/15
| Property | Unit | Min | Max | Test method |
|---|---|---|---|---|
| Softening point (Ring & Ball) | °C | 110 | 120 | ASTM D36 |
| Penetration at 25°C | 0.1 mm | 10 | 20 | ASTM D5 |
| Loss on heating (5 h at 163°C) | % wt | – | 0.2 | ASTM D6 |
| Solubility in CS₂ | % wt | 99.0 | – | ASTM D4 |
| Flash point (COC) | °C | 250 | – | ASTM D92 |
| Specific gravity at 25°C | – | 1.01 | 1.05 | ASTM D70 |
Typical values based on ASTM D36 · ASTM D5. The binding specification for each cargo is the certificate of analysis issued at loading. Custom specifications are available on request.
Storing Bitumen 115/15
Temperature: Store drums, cartons and bags in a cool, shaded area. Direct sun can soften and deform packages.
Stacking: Stack on pallets on level ground, and keep jumbo bags off wet surfaces.
Melting: Melt gradually in a kettle or melter with temperature control. Avoid local overheating and never add water.
Shelf life: Oxidized grades are very stable in solid form. Keep packaging closed and protected from contamination.
How we ship Bitumen 115/15
Get a price for Bitumen 115/15
Tell us the quantity and destination port. We'll send you a written offer today.
- No cost to ask
- FOB · CIF · CFR · DAP
- LC, SBLC or TT against documents
Bitumen 115/15: common questions
What is Bitumen 115/15?+
Oxidized bitumen 115/15 has a softening point of about 115°C and a penetration of about 15 dmm. Its very high softening point makes it suitable for coatings and compounds exposed to high service temperatures.
What is Bitumen 115/15 used for?+
Bitumen 115/15 is mainly used for: roofing felts, membranes and built-up roofing; waterproofing and damp-proofing of foundations and structures; pipe coating and corrosion protection; industrial compounds, battery and cable sealing, paints.
Which standard does WGV's Bitumen 115/15 meet?+
Supplied to softening point / penetration grade, tested to ASTM methods for softening point, penetration, loss on heating, solubility and flash point.
How is Bitumen 115/15 shipped?+
WGV Oil Trading ships Bitumen 115/15 by jumbo bags, cartons or steel drums, on FOB, CIF, CFR or DAP terms. Every cargo is inspected at the load port by SGS, Intertek or an equivalent independent inspector.
How do I get a price for Bitumen 115/15?+
Send the quantity, destination port, preferred Incoterms and timing through the quote form on this page, by WhatsApp on +34 663 192 105, or by email to sales@wgvoiltrading.com. WGV Oil Trading replies with a written offer the same day. Payment is by documentary LC, SBLC or TT against documents.